Engineering Services
NATECH Environmental Services Inc. is a progressive consulting engineering firm. We offer a wide variety of engineering services to suit your needs.
Waste Water Treatment and Disposal
NATECH offers many design services for waste water treatment. These include:
- Septic systems and on-site disposal fields including:
- leaching galleys
- Pipe in stone fields
- Infiltration chambers
- Enviro-septic systems
- Constructed and engineered wetlands
- Sewage treatment lagoons
- Design of mechanical component (aerators, pumps, controllers, etc)
- Septic systems and on-site disposal fields
- Design of mechanical components
- Constructed and engineered wetlands
- Aerators and controllers
Bathymetric Surveys
Surveys of water bodies. Sludge accumulation in wastewater treatment lagoons.
- Sludge accumulation in wastewater treatment lagoons
- Remotely controlled boat planes while surveying the bottom of a lagoon
- River and lake bathymetry
Mathematical Modeling
We use sophisticated mathematical models to predict flows, currents and water quality. Routinely we apply models to the following scenarios:
- Diffuser design
- River and tidal flows
- Water quality
- Effluent plume dilution
- Industrial facility design
- Flow Tracing
- Pollution Dispersion Simulation
- Diffuser Design
UVA Drone Photography and LIDAR Mapping
We create high-resolution maps for monitoring of sites, showing future land use changes, land development or measuring quantities of material piles. Drone and LIDAR surveys provide easy, fast and accurate aerial data acquisition that will enable you to take informed and targeted action. Drone or LIDAR surveys provide valuable information to developers, farmers, construction, mining, and land and resource management, or for gathering data for any area that needs to be looked at closely and frequently. Flights can be repeated as often as you need, and we can compare and overlay the resulting data in animations over time.
- 3D Point Cloud (terrain model) from 150 images (zoom out), medium resolution
- Digital Terrain Model
- LiDAR Aerial Photograph
- Bank Erosion, directional aerial photography
- Composite aerial photo
- Composite Aerial View from individual images (five images)
Mapping
Our mapping department presents spacial information in two and three dimension formats. We also model information using a variety of GIS software suites.
- 3D Topography and Bathymetry
- Geographic Information Systems
- 3-D Trail Models
Assimilative Capacity
Assimilative capacity studies determine the maximum concentration in various contaminants that an effluent can have before it is released in a water body, without impacting wildlife. The Canadian Water Quality Guidelines and CCME guidelines are used as a reference for such calculations.
NATECH has developed techniques to perform mixing zone delineations (evaluate the spread and dilution of effluent plumes for any size of water body) in the field, coupled with computer models to predict plume behaviour in low-flow situations. A benign dye is used to record effluent dilutions in the field.
The dye can be detected in river and ocean water in concentrations as low as 1:1,000,000,000 (one to one billion) dilution. This cost effective methodology in also used to measure flows, infiltration, leakage, contamination, groundwater migration, residence times, short circuiting in pipes, tanks and open water bodies.
Other Services
NATECH also provides many other services, including:
- Design of drinking water treatment plants
- Storm water management systems
- Design of recreational facilities
- Environmental Impact Assessment studies
- Phase 1 & 2 Site Assessments
- Interpretation of legislative requirements
- Liaison with regulatory agencies
- Laboratory experiments and testing
- Inspection of facilities
- Dredge Spoil Settling Tests
- Design of Harvey Skate Board Park
- Oak Point Splash Pad
- PCS Brine Sprayer